Vote for BP.Net for the 2013 Forum of the Year! Click here for more info.

» Site Navigation

» Home
 > FAQ

» Online Users: 2,435

0 members and 2,435 guests
No Members online
Most users ever online was 6,337, 01-24-2020 at 04:30 AM.

» Today's Birthdays

None

» Stats

Members: 75,175
Threads: 248,602
Posts: 2,569,153
Top Poster: JLC (31,651)
Welcome to our newest member, LouveniaEl
Results 1 to 3 of 3

Threaded View

  1. #3
    BPnet Veteran Erie_herps's Avatar
    Join Date
    03-08-2021
    Location
    Midwest, USA
    Posts
    278
    Thanks
    989
    Thanked 379 Times in 201 Posts
    I've hatched almost 20 babies, so I've experimented a bit and found what does and doesn't work for me. Put it in a small airtight container (like a food container or deli cup). If the container isn't airtight you can cover it with press and seal/saran wrap. From there poke anywhere from 2-10 small holes (think thumbtack sized), depending on your humidity. If you have a very low humidity in your area, only put a couple holes in, if you have a high humidity, you can put a lot in.

    For an incubation medium, you have a lot of freedom. I personally use shallow vermiculite and set the eggs in it, and then put moss around the eggs (so they aren't touching) this has worked perfectly for me and I use it for all my clutches now (I've had problems with only vermiculite and only moss, and a mix works great). A list of some things you could use as a medium: water, paper towels, (sterilized) soil, moss, vermiculite, or perlite. If you use water or paper towels, you want to elevate the egg. A lot of breeders use a light diffuser, but for one egg you could just use an upside down container (for water) or a piece of something (like fabric, for paper towels). If you use water, switch to paper towels before it hatches. If you use soil be sure to bake it in the oven or buy specific pure soil (no fertilizers). I personally don't use moss because the eggs turned yellow from the moisture, but if the moss is on the dryer side where the egg comes in contact with it and the rest of it is wet, then it will work. Vermiculite and perlite are simple and foolproof, just put some in the bottom of the container ~1" deep and add water. No matter what you use (unless the egg is elevated like for water or paper towels), to add water just pour some in the substrate so when you pick it up and squeeze it, it doesn't drip, but it holds its shape.

    Be sure to keep the egg in the same orientation so the baby inside doesn't drown. I make a little mark on the top with a marker.

    There isn't much that's precise about any of this, as long as the egg doesn't dry out, almost anything is okay. It's a long post, but if you're anything like me you want step by step instructions, and if not, you should still be able to find useful information. Keep us updated if the egg hatches. Partho eggs aren't usually as healthy, so the egg is more likely to die and the baby might not live for very long. But, there have been plenty of documentation of healthy babies hatching.
    Last edited by Erie_herps; 09-14-2022 at 04:42 PM.

  2. The Following 2 Users Say Thank You to Erie_herps For This Useful Post:

    Bogertophis (09-14-2022),Homebody (09-14-2022)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.2.1